MC55_ATC_V04.00 Page 354 of 475 3/17/06
Confidential / Released
13.14 AT+CSCB Select Cell Broadcast Message Indication
The test command returns the supported modes as a compound value.
The write command selects which types of CBMs are to be received by the ME.
Syntax
Parameter Description
Message mode
[0]
(&F)
Accept messages that are defined in <mids> and <dcss>
1 Forbid messages that are defined in <mids> and <dcss>
Cell Broadcast Message ID specification
•For <mode>=0: Six different possible combinations of CBM IDs (e.g. "0,1,5,320-478,922,2000-3000"), default
is empty string.
In certain configurations, e.g. if using SIMs that contain data in Elementary File EF-CBMID (Cell Broadcast
Message Identifier for Data download) less than six combinations may be available.
To access a SIM's Elementary File data refer to command AT+CRSM.
•For <mode>=1: One CBM ID or range of IDs (e.g. "320-478"), default is empty string.
CBM data coding scheme specification
All different possible combinations of CBM data coding schemes (e.g. "0-3,5"). Using default empty string leads
to get all CBMs independent of their dcss.
A given <dcss> replaces any former value and is used for consecutive requests.
Test Command
AT+CSCB=?
Response(s)
+CSCB: (list of supported <mode>s)
OK
Read Command
AT+CSCB?
Response(s)
+CSCB: <mode>, <mids>, <dcss>
OK
Write Command
AT+CSCB=[<mode>[, <mids>[, <dcss>]]]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge Last
GSM 07.05 % % % % % % ! ! !
<mode>
(num)
<mids>
(str)
<dcss>
(str)
To Next Page
Loading...
