Siemens Brodersen MC55 AT - AT+CPBS Select Phonebook Memory Storage

MC55_ATC_V04.00 Page 385 of 475 3/17/06
Confidential / Released
16.3 AT+CPBS Select phonebook memory storage
AT+CPBS selects the active phonebook storage, i.e. the phonebook storage that all subsequent phonebook com-
mands will be operating on.
The read command returns the currently selected <storage>, the number of <used> entries and the <total>
number of entries available for this storage. The test command returns all supported <storage>s as compound
value.
Syntax
Parameter Description
"FD" Fixed dialing phonebook
Capacity: depending on SIM card
Location: SIM
"SM"
(&F)
SIM phonebook
Capacity: depending on SIM card
Location: SIM
"ON" MSISDN list
Capacity: depending on SIM card
Location: SIM
"ME" Mobile Equipment Phonebook
Capacity: max. 250 entries
Location: ME
"LD" Last number dialed phonebook. Stores all voice call numbers dialed with ATD,
but no data call numbers.
Capacity: max. 10 entries
Location: depending on SIM this phonebook may reside partly or completely in
ME
AT+CPBW command is not applicable to this storage. The LD list can be deleted
with AT^SDLD or with AT^SPBD.
Test Command
AT+CPBS=?
Response(s)
+CPBS: (list of supported <storage>s)
OK
+CME ERROR
Read Command
AT+CPBS?
Response(s)
+CPBS: <storage>, <used>, <total>
OK
+CME ERROR
Write Command
AT+CPBS=<storage>
Response(s)
OK
+CME ERROR:
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
GSM07.07 % % % % % % ! ! !
<storage>
(str)