Siemens Brodersen MC55 AT - AT^SPLW Write an Entry to the Preferred Operators List

MC55_ATC_V04.00 Page 190 of 475 3/17/06
Confidential / Released
8.16 AT^SPLW Write an entry to the preferred operators list
The AT^SPLW write command writes an entry to the SIM list of preferred operators at location number <index>.
If <index> is given but <oper> is left out, the entry is deleted. An operator can be only once in the list. Test
command returns the whole index range supported by the SIM.
See also GSM 07.07: AT+CPOL
Syntax
Parameter Description
location number
Operator in numeric format (GSM Location Area Identification number which consists of a 3-digit country code
plus a 2- or 3-digit network code).
Test Command
AT^SPLW=?
Response(s)
^SPLW:(list of supported) <index>s
OK
ERROR
+CME ERROR:
Write Command
AT^SPLW=<index>[, <oper>]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
SIEMENS % % % % % % ! ! !
<index>
(num)
<oper>
(str)