Siemens Brodersen MC55 AT - AT^SPLR Read Entry from the Preferred Operators List

MC55_ATC_V04.00 Page 189 of 475 3/17/06
Confidential / Released
8.15 AT^SPLR Read entry from the preferred operators list
The AT^SPLR write command returns used entries from the SIM list of preferred operators with <indexa>
between <index1> and <index2>. If <index2> is not given, only entry at <index1> is returned. The test com-
mand returns the whole index range supported by the SIM.
See also GSM 07.07: AT+CPOL
Syntax
Parameter Description
Location number to start reading from
Location number where to stop reading
Index range supported by the SIM card (between <index1> and <index2>)
Operator in numeric form; GSM location area identification number
Test Command
AT^SPLR=?
Response(s)
^SPLR:(list of supported) <indexa>s
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SPLR=<index1>[, <index2>]
Response(s)
^SPLR: <index1><oper>
^SPLR: <index2><oper>
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
SIEMENS % % % % % % ! ! !
<index1>
(num)
<index2>
(num)
<indexa>
(num)
<oper>
(str)