MC55_ATC_V04.00 Page 225 of 475 3/17/06
Confidential / Released
10.1.2 Example: GPRS connection profile
^SICS: 1, "conType", "CSD"
The new CSD profile just created is indicated with all
related parameters set to their default.
^SICS: 1, "alphabet", "0"
Character set determined with AT+CSCS applies
when string parameters are input with AT^SICS.
^SICS: 1, "user", ""
No user name set.
^SICS: 1, "passwd", "*****"
Password masked with asteriks.
^SICS: 1, "inactTO", "20"
Inactivity timeout = 20s.
^SICS: 1, "calledNum", ""
No destination set.
^SICS: 1, "dataType", "1"
Remote device is analog, e.g. an analog modem.
^SICS: 2, "conType", ""
Profile with <conProfileId> 2 is still empty.
^SICS: 3, "conType", ""
Profile with <conProfileId> 3 is still empty.
^SICS: 4, "conType", ""
Profile with <conProfileId> 4 is still empty.
^SICS: 5, "conType", ""
Profile with <conProfileId> 5 is still empty.
OK
at^sics=0,conType,GPRS0
Select connection type GPRS0.
OK
AT^SICS=0,"inactTO", "20"
Inactivity timeout = 20s.
OK
AT^SICS=0,dns1,"193.254.160.1"
IP address of Primary DNS server.
OK
AT^SICS=0,passwd,t-d1
Password for GPRS services provided by the Ger-
man operator T-D1.
OK
AT^SICS=0,apn,"internet.t-d1.de"
APN to access the GPRS services provided by the
German operator T-D1.
OK
To Next Page
Loading...
Need help?
General
