Siemens Brodersen MC55 AT - AT^SISC Internet Service Close

MC55_ATC_V04.00 Page 244 of 475 3/17/06
Confidential / Released
10.6 AT^SISC Internet Service Close
The AT^SISC write command closes the TCP/IP connection to the remote peer which was opened with
AT^SISO. All resources are released, all status information parameters, e.g. <srvState>, <unackData>,
<ackData>, <rxCount> and <txCount> counters, are reset. Only the initial configuration settings are pre-
served. The service can be restarted any time, using the same configuration or a new one.
Syntax
Parameter Description
0...9 <srvProfileId> specified with AT^SISS.
Test Command
AT^SISC=?
Response(s)
OK
Write Command
AT^SISC=<srvProfileId>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
§ % % % % % ! ! !
<srvProfileId>
(num)