Siemens Brodersen MC55 AT - AT^SSTR SAT Response

MC55_ATC_V04.00 Page 380 of 475 3/17/06
Confidential / Released
15.4 AT^SSTR SAT Response
The TA is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Com-
mand has been executed. AT^SSTR will also provide any user information, e.g. a selected menu item.
Syntax
Parameter Description
MC55 Remote-SAT interface states
0 RESET
1 OFF
2IDLE
3 PAC
4WAIT
Number related to Proactive Command or event type according to GSM 11.14 [22].
Command status return regarding the type of action that has taken place, e.g. action performed by the user.
Values are in accordance with GSM 11.14 [22].
Response number entered by user
Response string entered by user
Test Command
AT^SSTR=?
Response(s)
^SSTR:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read Command
AT^SSTR?
Response(s)
^SSTR: <state>, <cmdType>
OK
Write Command
AT^SSTR=<cmdType>, <status>[, <inputNumber>][, <inputString>]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
SIEMENS ! % % % % % ! ! !
<state>
(num)
<cmdType>
(num)
<status>
(num)
<inputNumber>
(num)
<inputString>
(str)