Siemens Brodersen MC55 AT - Information Elements Related to FTP Service

MC55_ATC_V04.00 Page 254 of 475 3/17/06
Confidential / Released
10.10.2 Information Elements Related to FTP Service
48 Remote peer has closed the connection Remote peer has closed the
connection unexpectedly, and
no data are available. The host
shall close the service.
Note that the "^SIS" URC only
indicates the <urcInfoId>,
but the AT^SISE command
indicates both the <urcIn-
foId> and the <urcInfo-
Text>.
49 Fatal: No memory is available for service action
50 Fatal: Service has detected an internal error
80 Connection profile not defined.
84 PPP LCP FAILED PPP error
85 PAP Authentication failed PPP error
86 CHAP Authentication failed PPP error
87 IPCP failed PPP error
Warnings
4001 Applies only to interactive text
mode: Indicates that number of
input characters is greater than
<cnfWriteLength>.
General Information Elements
6001 General progress information
for connection setup.
<urcInfoId> <urcInfoText> Description
100 FTP Server rejects session.
101 FTP Server rejects USER command.
102 FTP Server rejects PASS command.
103 FTP Server rejects PASV command or client can't detect
remote IP address.
104 FTP Server rejects requested client action.
105 The given path segment is wrong.
106 *) The FTP client requests the file
size from the server before
starting the download. During
transmission phase the client
adds the bytes which are sent
via serial line. After transmis-
sion is done the client com-
pares the amount of bytes
transferred via serial line and
socket.
2100 FILE: <filename> File name assigned by FTP
server if mode=u is used.
<urcInfoId> <urcInfoText> Description