Siemens Brodersen MC55 AT - ATL Set Monitor Speaker Loudness; ATM Set Monitor Speaker Mode

MC55_ATC_V04.00 Page 402 of 475 3/17/06
Confidential / Released
17.2 ATL Set monitor speaker loudness
ATL is implemented for V.250ter compatibility reasons only, and has no effect. In multiplex mode (refer
AT+CMUX) the command is supported on logical channel 1 only.
Syntax
Parameter Description
17.3 ATM Set monitor speaker mode
ATM is implemented for V.250ter compatibility reasons only, and has no effect. In multiplex mode (refer
AT+CMUX) the command is supported on logical channel 1 only.
Syntax
Parameter Description
Exec Command
ATL[<val>]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
V.250 ! % ! % ! ! ! ! !
<val>
(num)
Exec Command
ATM[<val>]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
V.250 ! % ! % ! ! ! ! !
<val>
(num)