Siemens Brodersen MC55 AT User Manual

MC55_ATC_V04.00 Page 211 of 475 3/17/06
Confidential / Released
9.11 AT+COLP Connected Line Identification Presentation
This command refers to the GSM supplementary service COLP (Connected Line Identification Presentation) that
enables a calling subscriber to get the connected line identity (COL) of the called party after setting up a mobile
originated call. The command enables or disables the presentation of the COL at the TE. It has no effect on the
execution of the supplementary service COLR in the network.
Syntax
Unsolicited Result Code
Call response format:
+COLP: <number>, <type>
Parameter Description
0 Disable - suppress unsolicited result codes
1 Enable - display unsolicited result codes
0 COLP not provisioned (no presentation)
1 COLP provisioned
2 Unknown
String type phone number of connected address in format specified by <type>
Test Command
AT+COLP=?
Response(s)
+COLP:(list of supported <n>s)
OK
Read Command
AT+COLP?
Response(s)
+COLP: <n>, <m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+COLP=[<n>]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
GSM 07.07 % % % % % % ! ! !
<n>
(num)
<m>
(num)
<number>
(str)

Siemens Brodersen MC55 AT Specifications

General

Brand	Siemens
Model	Brodersen MC55 AT
Category	Modem
Language	English