Siemens Brodersen MC55 AT User Manual

MC55_ATC_V04.00 Page 303 of 475 3/17/06
Confidential / Released
Page Width
[0] 1728 pixels in 215mm
1 2048 pixels in 255 mm
2 2432 pixels in 303 mm
3 1216 pixels in 151 mm
4 864 pixels in 107 mm
Note
• The host application is not required to support all values of the parameters listed above. Depending on the
application design it may be sufficient to implement only the default values. See T.31, T.32 and EIA PN-2388
specifications for further advice.
12.1.1 Summary of Fax Class 2 URCs defined by EIA PN-2388
The following URCs are messages indicated in communication only. The URCs are not user definable.
Table 12.1: Summary of Fax Class 2 URCs defined by EIA PN-2388
<wd>
(num)
URC Meaning
+FCON Indicates connection with a fax machine.
+FCSI: <id> Reports the remote ID, called station ID.
+FDCS: <vr>, <br>, <wd>, <ln>, <df>,
<ec>, <bf>, <st>
Reports current session parameters (refer to EIA PN-2388, Table
3.10).
+FDIS: <vr>, <br>, <wd>, <ln>, <df>, <ec>,
<bf>, <st>
Reports the remote station capabilities (refer to EIA PN-2388,
Table 3.10).
+FET: <stat> Post page message. Indicates whether or not further pages or
documents are pending.
+FHNG: <stat> Reports that call has been terminated and indicates status.
+FNSF: "<param>" Reports non-standard setup frame.
+FPTS: "<stat>" Reports the status of received pages.
+FTSI: "<id>" Reports the remote ID, transmit station ID.

Siemens Brodersen MC55 AT Specifications

General

Brand	Siemens
Model	Brodersen MC55 AT
Category	Modem
Language	English