Siemens Brodersen MC55 AT - Page 230

MC55_ATC_V04.00 Page 230 of 475 3/17/06
Confidential / Released
Syntax
Parameter Description
Internet service profile identifier.
The <srvProfileId> is used to reference all parameters related to the same service profile. Furthermore,
when using the AT commands AT^SISO, AT^SISR, AT^SISW and AT^SISC the <srvProfileId> is needed
to select a specific service profile.
0...9
Internet service profile parameter.
srvType Type of Internet service to be configured with consecutive usage of AT^SISS.
For supported values of <srvParmValue> refer to <srvParmValue-srv-
Type>.
alphabet Selects the character set for input and output of string parameters within a pro-
file.
The selected value is bound to the specific profile. This means that different
profiles may use different alphabets. Unlike other parameters the alphabet can
be changed no matter whether the <srvParmTag> value "srvType" has been
set.
For supported values of <srvParmValue> refer to <srvParmValue-
alphabet>.
user User name string
1. Socket
Not applicable.
2. FTP
Not applicable; set within "address" parameter.
3. HTTP
Length: 2 ... 31
User name for the HTTP authentication mechanism. Currently only HTTP
simple authentication is supported.
Test Command
AT^SISS=?
Response(s)
OK
Read Command
AT^SISS?
Response(s)
^SISS: <srvProfileId>, <srvParmTag>, <srvParmValue>
OK
Write Command
AT^SISS=<srvProfileId>, <srvParmTag>, <srvParmValue>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3 Charge  Last
! % % % % % ! ! !
<srvProfileId>
(num)
<srvParmTag>