Siemens Brodersen MC55 AT User Manual

MC55_ATC_V04.00 Page 238 of 475 3/17/06
Confidential / Released
Parameter Description
Internet service profile identifier as defined by AT^SISS (<srvProfileId>).
0...9
Internet service state (for details see AT^SISO parameter <srvState>).
2 Allocated
3 Connecting
4Up
5 Closing
6Down
Number of bytes received via AT^SISR since last successful AT^SISO write command.
This is the same value as displayed by the AT^SISO read command with the parameter <rxCount>.
Number of bytes sent via AT^SISW since last successful AT^SISO write command.
This is the same value as displayed by the AT^SISO read command with the parameter <txCount>.
Number of data bytes already sent and acknowledged at TCP layer. Value 0 indicates that no sent data is
acknowledged yet.
Parameter is not applicable to HTTP, POP3, SMTP and Socket UDP client. For these services the counter is
always set to 0.
Number of data bytes already sent but not yet acknowledged at TCP layer. A value 0 indicates that all sent data
is already acknowledged.
This is the same value as displayed in the response of the AT^SISW write command with the parameter
<unackData>.
Parameter is not applicable to HTTP, POP3, SMTP and Socket UDP client. For these services the counter is
always set to 0.
Note
• If a service is in state "Down" the responses for <rxCount>, <txCount>, <ackData> and <unackData>
are the last known values for the service in the states "Connecting", "Up" and "Closing".
<srvProfileId>
(num)
<srvState>
(num)
<rxCount>
(num)
<txCount>
(num)
<ackData>
(num)
<unackData>
(num)

Siemens Brodersen MC55 AT Specifications

General

Brand	Siemens
Model	Brodersen MC55 AT
Category	Modem
Language	English