Siemens Brodersen MC55 AT User Manual

MC55_ATC_V04.00 Page 274 of 475 3/17/06
Confidential / Released
URC 5
+CGEV: NW DETACH
The network has forced a GPRS detach.
URC 6
+CGEV: ME DETACH
The mobile equipment has forced a GPRS detach.
URC 7
+CGEV: NW CLASS <class>
The network has forced a change of MS class. The highest available class is reported.
URC 8
+CGEV: ME CLASS <class>
The mobile equipment has forced a change of MS class. The highest available class is reported.
Parameter Description
0
(P)
Buffer unsolicited result codes in the MT. Currently 3 +CGEV URCs can be
buffered. If MT result code buffer is full, the oldest ones will be discarded. No
codes are forwarded to the TE.
1 Discard unsolicited result codes when MT TE link is reserved (e.g. in on line
data mode); otherwise forward them directly to the TE.
2 Buffer unsolicited result codes in the MT when MT TE link is reserved (e.g. in
on line data mode) and flush them to the TE when MT TE link becomes avail-
able; otherwise forward them directly to the TE. Currently 3 +CGEV URCs can
be buffered. If MT result code buffer is full, the oldest URCs will be discarded.
0 MT buffer of unsolicited result codes defined within this command is cleared
when <mode> 1 or 2 is entered
1 MT buffer of unsolicited result codes defined within this command is flushed to
the TE when <mode> 1 or 2 is entered (OK response will be given before flush-
ing the codes). Buffer is empty afterwards.
Parameter indicates the GPRS mobile class.
"B" class B
<mode>
(num)
<bfr>
(num)
<class>
(str)

Siemens Brodersen MC55 AT Specifications

General

Brand	Siemens
Model	Brodersen MC55 AT
Category	Modem
Language	English