MC55_ATC_V04.00 Page 377 of 475 3/17/06
Confidential / Released
Parameter Description
MC55 Remote-SAT interface states
0 RESET
1 OFF
2IDLE
3 PAC
4WAIT
0 GSM character set
Input of a character requests one byte, e.g. "Y".
1 UCS2
To display the 16 bit value of characters represented in UCS2 alphabet a 4 byte
string is required, e.g. "0059" is coding the character "Y". For details please
refer to ISO/IEC 10646.
0 SAT is already used on another instance (logical channel in case of the multi-
plex protocol). Only test and read commands can be used.
1 SAT may be started on this instance via the write version of this command.
SAT profile according to GSM 11.14 [22].
The profile tells the SIM Application which features (e.g. proactive commands) are supported by the SIM Appli-
cation Toolkit implementation of the MC55.
1 Activate Remote-SAT
Note
• To limit the time Remote-SAT is kept in states PAC or WAIT any ongoing (but unanswered) Proactive Com-
mand is automatically aborted after 10 minutes with Terminal Response "ME currently unable to process com-
mand" or "No response from user" if applicable. An URC "Terminate Proactive Command" will be send to the
external application in this case, too.
<state>
(num)
<Alphabet>
(num)
<allowedInstance>
(num)
<SatProfile>
(str)
<mode>
(num)
To Next Page
Loading...
