MC55_ATC_V04.00 Page 408 of 475 3/17/06
Confidential / Released
Notes
• The factory defaults of AT^SAIC vary with the selected audio mode.
If AT^SNFS=1 or 4 or 5, then AT^SAIC=2,1,1.
If AT^SNFS=2 or 3 or 6, then AT^SAIC=2,2,2.
AT^SNFD can be used to reset the factory defaults.
• For use after restart of the ME, you are advised to store the settings of AT^SAIC and AT^SNFS to the audio
profile saved with AT^SNFW. Otherwise, audio mode 1 (AT^SNFS=1) and audio interface 2 (AT^SAIC=2,1,1)
will be active each time the ME is powered up.
To Next Page
Loading...
