MC55_ATC_V04.00 Page 58 of 475 3/17/06
Confidential / Released
EXAMPLE 2
Usage of "URC/Ringline" and "URC/Datamode/Ringline":
^SCFG:"Audio/AMR","23405"
AMR is disabled for any operator, but enabled for
operator "23405".
OK
AT^SCFG="Audio/AMR","23203"
^SCFG:"Audio/AMR","23405","23203"
AMR is disabled for any operator, but enabled for
operators "23405" and "23203".
OK
AT^SCFG="Audio/AMR"
Query parameter "Audio/AMR"
^SCFG:"Audio/AMR","23405","23203"
OK
AT+CSCS="GSM"
Switch to GSM character set.
OK
AT^SCFG?
Query all parameters.
...
^SCFG:"URC/Datamode/Ringline","off"
While the TA-TE link is reserved URCs will be indi-
cated by BREAK.
^SCFG:"URC/Ringline","local"
URCs on this interface will be indicated by Ring line
associated to the interface (e.g. RING0 for ASC0).
...
OK
AT^SCFG="URC/Datamode/Ringline","on"
^SCFG:"URC/Datamode/Ringline","on"
While the TA-TE link is reserved URCs will be indi-
cated by an activated "local" Ring line.
OK
AT^SCFG="URC/Ringline","asc0"
^SCFG:"URC/Ringline","asc0"
URCs on this interface will be indicated by an acti-
vated RING0 no matter whether or not the TA-TE link
is reserved.
OK
AT^SCFG="URC/Datamode/Ringline","off"
^SCFG:"URC/Datamode/Ringline","off"
URCs on this interface will be indicated by an acti-
vated RING0 if the TA-TE link is not reserved and by
BREAK if the TA-TE link is reserved.
OK
AT^SCFG="URC/Ringline"
Disable any Ring line indication for URCs on this
interface.
^SCFG:"URC/Ringline","off"
OK
To Next Page
Loading...
