Siemens ET 200pro - Page 187

Functions
8.2 PROFINET IO
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
187
The data structures in the data records correspond to the PROFINET IO definitions.
Table 8- 7 Identification data for PROFINET IO
Identification data
Access
Default
Description
Identification data 0: (data record index AFF0 hex)
VendorIDHigh
Read (1 byte)
00 hex
The name of the manufacturer is stored
here. (42 dec = SIEMENS AG)
VendorIDLow
Read (1 byte)
2A hex
Order_ID
Read (20 byte)
Order number of the module
IM_SERIAL_NUMBER
Read (16 byte)
-
Serial number (device-specific)
IM_HARDWARE_REVISION
Read (2 byte)
1
According to hardware version
IM_SOFTWARE_REVISION
read
Firmware version
Indicates the firmware version of the
module.
• SWRevisionPrefix
(1 byte) V, R, P, U, T
• IM_SWRevision_Functional_
Enhancement
(1 byte) 00 - FF hex
• IM_SWRevision_Bug_Fix
(1 byte) 00 - FF hex
• IM_SWRevision_Internal_
Change
(1 byte) 00 - FF hex
IM_REVISION_COUNTER Read (2 byte) - Provides information on parameter
modifications on the module.
IM_PROFILE_ID
Read (2 byte)
0000
Generic device
IM_PROFILE_SPECIFIC_TYPE
Read (2 byte)
0005 hex
on interface modules
IM_VERSION
read
0101 hex Provides information on the identification
data version
(0101 hex = version 1.1)
• IM_Version_Major
(1 byte)
• IM_Version_Minor
(1 byte)
IM_SUPPORTED Read (2 byte) 000E hex Provides information on existing
identification data (I&M1 to I&M3)
Maintenance data 1: (data record index AFF1 hex)
IM_TAG_FUNCTION Read/write
(32 byte)
- Enter a identifier here that is unique plant-
wide.
IM_TAG_LOCATION Read/write
(22 byte)
- Define the installation location of the
module.
Maintenance data 2: (data record index AFF2 hex)
IM_DATE Read/write
(16 byte)
YYYY-MM-DD HH:MM Enter the installation date of the module
here.
Maintenance data 3: (data record index AFF3 hex)
IM_DESCRIPTOR Read/write
(54 byte)
- Enter a comment describing the module.