Siemens ET 200pro - Manufacturer ID; Identifier-Related Diagnostic Data

Alarm, error and system messages
9.1 PROFIBUS DP
ET 200pro distributed I/O system
202 Operating Instructions, 03/2013, A5E00335544-08
9.1.8
Manufacturer ID
Definition
The manufacturer ID contains a code specifying the type of the DP slave.
The table shows the structure of the manufacturer ID (bytes 4 and 5).
Byte 4
Byte 5
Manufacturer ID for
81
H
18
H
ET 200pro with IM154-1 DP
81
H
19
H
ET 200pro with IM154-2 DP High Feature
9.1.9
Identifier-related diagnostic data
Definition
The identifier-related diagnostic data indicates whether or not modules of the ET 200pro
signal an error or not. The identifier-related diagnostic data begins as of byte 6 and
comprises 4 bytes.
Structure of identifier-related diagnostic data
The identifier-related diagnostic data for the ET 200pro is structured as follows:
Figure 9-4 Structure of identifier-related diagnostic data