Siemens ET 200pro - Connecting Actuators to Digital Inputs; Connection of Actuator;Sensor Distributors to the Digital Inputs and Outputs

Appendix
A.5 Connection examples
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
513
A.5.2
Connecting actuators to digital inputs
Connection example 4 DO DC 24V/2.0A
2-wire
A.5.3
Connection of actuator/sensor distributors to the digital inputs and outputs
Connection of an actuator/sensor distributor to the digital inputs using the connection module
CM IO 2 x M12
Connection of an actuator/sensor distributor to the digital inputs using the connection module
CM IO 2 x M12
Figure A-35 Actuator/sensor distributor to digital inputs with connection module CM IO 2 x M12