Siemens ET 200pro - PM-O DC 2 X24 V Outgoing Module

Power modules
13.2 PM-O DC 2x24V outgoing module
ET 200pro distributed I/O system
324 Operating Instructions, 03/2013, A5E00335544-08
13.2
PM-O DC 2x24V outgoing module
Order number
6ES7148-4CA60-0AA0
Properties
The PM-O DC 2x24V outgoing module has the following properties:
● Tapping the 1L+ electronics/encoder supply and the 2L+ load voltage supply using push-
pull cable connectors.
Pin assignment of the load voltage supply at the CM PM-O PP connection module
View of the push-pull cable connector
Terminal
Assignment of X01/X02
Electronics/encoder supply and load voltage supply of
X01
1
1L+ electronics/encoder supply
2
Ground for electronics/encoder supply 1M
3
2L+ load voltage supply
4
Ground for load voltage supply 2M
5
Functional earth
Electronics/encoder supply and load voltage supply of
X02
1
1L+ electronics/encoder supply
2
Ground for electronics/encoder supply 1M
3
2L+ load voltage supply
4
Ground for load voltage supply 2M
5
Functional earth