Siemens ET 200pro - Connection Modules for Power Modules; CM PM-E Direct Connection Module for Power Modules

Connection modules
11.4 Connection modules for power modules
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
279
11.4
Connection modules for power modules
11.4.1
CM PM-E Direct connection module for power modules
Order number
6ES7194-4BC00-0AA0
Properties
The CM PM Direct connection module has the following properties:
● Can be plugged in and attached with screws to the power module.
● Connecting the 2L+ load voltage supply using screw terminals.
● You can loop through the 2L+ load voltage supply via additional terminals
● 3 inscription labels
Pin assignment
For details on the pin assignment of CM PM Direct, refer to the chapter Power modules
(Page 319).
Block diagram
The block diagram shows the CM PM Direct connection module.
①
X01: Connection for infeed of the 2L+ load voltage supply
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)
45 x 130 x 100
Weight
Approx. 140 g
Currents
Feed current
• 2L+ load voltage supply
16 A