Siemens ET 200pro - Options for Combining Modules

Application Planning
2.5 Options for Combining Modules
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
37
2.5
Options for Combining Modules
Introduction
You can use power/outgoing modules, interface modules, and electronic modules,
respectively, with connection modules in various combinations. The following tables show
the permitted combinations of connection modules and power/outgoing modules, interface
modules, and electronic modules.
Possible combinations of power/outgoing modules and connection modules
Table 2- 6 Power/outgoing modules in combination with connection modules
Power/outgoing module
Connection module for power/outgoing module
CM PM Direct
CM PM ECOFAST
CM PM 7/8"
CM PM PP
CM PM-O PP
PM-E DC 24V
•
•
•
•
PM-O DC 2x24V
•
Possible combinations of interface modules and connection modules
Table 2- 7 Interface modules in combination with connection modules
Interface module
Connection module for interface module
CM IM DP
Direct
CM IM DP
ECOFAST
Cu
CM IM DP
M12, 7/8"
CM IM PN
M12, 7/8"
CM IM PN
PP Cu
CM IM PN
PP FO
CM IM PN
DP M12,
7/8"
IM 154-1 DP
•
•
•
IM 154-2 DP High
Feature
• • •
IM 154-4 PN High
Feature
6ES7154-4AB10-
0AB0
• • •
IM 154-4-8 CPU
6ES7154-8AB00-
0AB0
•