Siemens ET 200pro - CM IO 4 X M12 P Connection Module for Electronic Modules

Connection modules
11.3 Connection modules for electronic modules
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
263
11.3.2
CM IO 4 x M12P connection module for electronic modules
Order number
6ES7194-4CA10-0AA0
Properties
Properties of the CM IO 4 x M12P connection module:
● Can be plugged in and attached with screws to the electronic module
● 4 M12 circular socket connectors
● 4 labels and 1 module tag
Pin assignment
The pin assignment depends on the electronic module used.
View
Connection
Designation
X1 1. M12 circular socket
connector
X2 2. M12 circular socket
connector
X3 3. M12 circular socket
connector
X4 4. M12 circular socket
connector
Block diagram
The figure below shows the block diagram of the connection module CM IO 4 x M12P.
Figure 11-5 Block diagram, CM IO 4 x M12P connection module