Siemens ET 200pro - CM IO 8 X M8 Connection Module for Electronic Modules

Connection modules
11.3 Connection modules for electronic modules
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
273
11.3.7
CM IO 8 x M8 connection module for electronic modules
Order number
6ES7194-4EB00-0AA0
Properties
Properties of the CM IO 8 x M8 connection module:
● Can be plugged in and attached with screws to the electronic module
● 8 M8 circular socket connectors
● 8 labels and 1 module identification tag
Pin assignment
The pin assignment depends on the electronic module used.
View
Connection
Designation
X1
1. M8 circular socket connector
X2
2. M8 circular socket connector
X3
3. M8 circular socket connector
X4
4. M8 circular socket connector
X5
5. M8 circular socket connector
X6
6. M8 circular socket connector
X7
7. M8 circular socket connector
X8 8. M8 circular socket connector
Block diagram
The figure below shows the block diagram of CM IO 8 x M8 connection module.
Figure 11-10 Block diagram CM IO 8 x M8