Siemens ET 200pro - Diagnostics in STEP 7; Reading out the Diagnostic Data

Alarm, error and system messages
9.2 PROFINET IO
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
223
9.2.5
Diagnostics in STEP 7
9.2.5.1
Reading out the diagnostic data
Options for reading out diagnostic data
Table 9- 5 Reading out the diagnostic data with STEP 7
Automation system
with
IO controller
Block or
tab in STEP 7
Application
See ...
SIMATIC S7 e.g. in HW Config via
"Station > Open
ONLINE"
Device diagnostics in
form of plain text on
STEP 7 interface (in the
Quick View, Diagnostics
View, or Module
Information windows)
"Diagnosing hardware" in
STEP 7 online help
SFB 52
"RDREC"
Reading data records
from the IO device
For SFBs, refer to STEP 7
online help
(system
functions/system function
blocks)
SFB 54
"RALRM"
Receiving interrupts from
the IO device
For SFBs, refer to STEP 7
online help
(system
functions/system function
blocks)