Siemens ET 200pro - CM IO 8 X M12 D Connection Module for Electronic Modules

Connection modules
11.3 Connection modules for electronic modules
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
271
11.3.6
CM IO 8 x M12D connection module for electronic modules
Order number
6ES7194-4CB50-0AA0
Properties
The CM IO 8 x M12D connection module has the following properties:
● Can be plugged in and attached with screws to the electronic module
● 8 M12 circular socket connectors
● 8 labels and 1 module identification tag
Pin assignment
The pin assignment depends on the electronic module used.
View
Connection
Designation
X1 1. M12 circular socket
connector
X2 2. M12 circular socket
connector
X3 3. M12 circular socket
connector
X4 4. M12 circular socket
connector
X5 5. M12 circular socket
connector
X6 6. M12 circular socket
connector
X7 7. M12 circular socket
connector
X8 8. M12 circular socket
connector
Block diagram
The block diagram below relates to the CM IO 8 x M12D connection module.
Figure 11-9 Block diagram, CM IO 8 x M12D connection module