Siemens ET 200pro - CM PM-E 7;8 Connection Module for Power Modules

Connection modules
11.4 Connection modules for power modules
ET 200pro distributed I/O system
282 Operating Instructions, 03/2013, A5E00335544-08
11.4.3
CM PM-E 7/8" connection module for power modules
Order number
6ES7194-4BD00-0AA0
Properties
Properties of CM PM 7/8" connection module:
● Can be plugged in and attached with screws to the power module PM-E DC24V
● Connection of the 2L+ load voltage supply using a 7/8" connector
● 2 inscription labels
Pin assignment
For details on the pin assignment of CM PM 7/8", refer to the chapter Power modules
(Page 319).
Block diagram
The block diagram below shows the CM PM 7/8" connection module.
①
X01: Connection for infeed of the 2L+ load voltage supply
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)
45 x 130 x 48
Weight
Approx. 120 g
Currents
Feed current
• 2L+ load voltage supply
8 A