Connection modules
11.3 Connection modules for electronic modules
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
267
CM IO 8 x M12 connection module for electronic modules
Order number
6ES7194-4CB00-0AA0
The CM IO 8 x M12 connection module has the following properties:
● Can be plugged in and attached with screws to the electronic module
● 8 M12 circular socket connectors
● 8 labels and 1 module identification tag
The pin assignment depends on the electronic module used.
X1 1. M12 circular socket
X2 2. M12 circular socket
X3 3. M12 circular socket
X4 4. M12 circular socket
X5 5. M12 circular socket
X6 6. M12 circular socket
X7 7. M12 circular socket
X8 8. M12 circular socket
connector
The figure below shows the block diagram of the connection module CM IO 8 x M12.
Figure 11-7 Block diagram, CM IO 8 x M12 connection module
To Next Page
Loading...
