Siemens ET 200pro - Structure of Slave Diagnostic Data

Alarm, error and system messages
9.1 PROFIBUS DP
ET 200pro distributed I/O system
198 Operating Instructions, 03/2013, A5E00335544-08
9.1.5
Structure of slave diagnostic data
Structure of slave diagnostic data
The figure below illustrates the structure of slave diagnostics.
Figure 9-3 Structure of slave diagnostic data
The identifier-related diagnostics, module status, and the channel-specific diagnostics can
be deactivated or activated via parameters when configuring is implemented using the GSD
file. If you deactivate these diagnostics, they are removed from the diagnostic message
frame.