Siemens ET 200pro - Page 25

Description
1.5 Components of the ET 200pro distributed IO system
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
25
Component
Function
View
Connection
modules for the
interface
module
(6ES7154-
4AB10-0AA0)
with
PROFINET IO
The connection modules are mounted
on the interface module. They are
used to connect PROFINET IO and
the electronic, encoder, and load
voltage supplies.
The following connection modules are
available:
• CM IM PN M12, 7/8" ①
• CM IM PN PP Cu
②
• CM IM PN PP FO
③
Power module
with bus
module and
outgoing
module
① The power module provides a
new potential group for the 2L+ load
voltage supply.
The unit is shipped with the power
module mounted on the bus module.
② The outgoing module enables the
1L+ electronics/
encoder supply and the 2L+ load
voltage supply to be tapped.