Siemens ET 200pro - Page 316

Interface modules
12.2 Interface modules for PROFINET IO
ET 200pro distributed I/O system
316 Operating Instructions, 03/2013, A5E00335544-08
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W × H × D (mm)
135 x 130 x 60
Weight
Approx. 490 g
Module-specific data
Transfer rate
100 Mbit/s full duplex
Transmission procedure
100BASE-TX
Autonegotiation
Yes
Bus protocol
PROFINET IO
Supported Ethernet services PROFINET IO (Device),
TCP/IP Protocol Suite:
• Network management functions
• ping
• arp
Network diagnostics (SNMP)
PROFINET interface
• Connection socket
2 x M12 d-coded
• Switch function
Yes, internal
• Auto-cross-over
Yes; for segment expansion with additional IO
devices or for connection of a PG
VendorID
002A
H
DeviceID 0305
H
Voltages and currents
Rated supply voltage of the electronic
components (1L+)
24 V DC
• Reverse polarity protection
Yes; against destruction
• Short-circuit protection
Yes; with replaceable fuses
• Feed current 1L+
Max. 5 A; per ET 200pro
Rated load voltage 2L+ 24 V DC(integrated power module)
• Reverse polarity protection
Yes; against destruction
• Short-circuit protection
Yes, for the potential group
• Feed current 2L+
Max. 10 A; per ET 200pro
Current consumption
From rated supply voltage (1L+) Typ. 250 mA; with CM IM PN M12, 7/8" or
CM IM PN PP Cu
Typ. 350 mA; with CM IM PN PP FO
Power loss of the module Typ. 6 W; with CM IM PN M12, 7/8" or
CM IM PN PP Cu
Typ. 6.7 W; with CM IM PN PP FO