Siemens ET 200pro - Page 339

Digital electronic modules
14.2 Digital electronic module 8 DI DC 24V High Feature (6ES7141-4BF00-0AB0)
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
339
Technical specifications
Monitoring for
• Short-circuit
Yes; per channel
• Wire break
Input < 0.3 mA; per channel
Encoder supply
Number of encoder supplies
8
Output current
• Rated value
0.5 A; per channel
• Total current of outputs, up to 55° C
Max. 1 A
Short-circuit protection
Yes, electronic, per channel
• Response threshold
Min. 0.7 A
Encoder selection data
Input voltage
• Rated value
24 V DC
• For "1" signal
11 V to 30 V
• For "0" signal
-3 V to +5 V
Input current
• With "1" signal
Typ. 8 mA
Input delay
• At "0" to "1" transition
0.5 ms/3 ms/15 ms/20 ms
• At "1" to "0" transition
0.5 ms/3 ms/15 ms/20 ms
Input characteristics
to IEC 61131, type 2
Connection of 2-wire proximity switch
Supported
• Permissible quiescent current
Max. 2 mA
See also
Connection module CM IO 4 x M12 for electronic modules (Page 261)
CM IO 8 x M12 connection module for electronic modules (Page 267)