Siemens ET 200pro - Page 34

Application Planning
2.3 Electronic modules to suit your application
ET 200pro distributed I/O system
34 Operating Instructions, 03/2013, A5E00335544-08
Application
Suitable module
Properties of the module
Measuring temperatures with
thermocouples
Measuring voltages
4 AI TC High Feature 4 input channels
Type B, E, J, K, L, N, R, S, T
±80 mV
Output of voltages 4 AO U High Feature 4 output channels
± 10 V; 0 to 10 V; 1 to 5 V
Output of currents 4 AO I High Feature 4 output channels
± 20 mA; 0 mA to 20 mA;
4 mA to 20 mA
Controlling valves with FESTO
valve terminal
16 DO DC 24V CPV10 FESTO valve terminal CPV10
Nominal flow rate air 400 l/min
16 DO DC 24V CPV14 FESTO valve terminal CPV14
Nominal flow rate air 800 l/min
Controlling RFID See RFID systems
(http://support.automation.siemens.com/WW/view/en/32622825
)
, RF170C operating instructions.
Controlling motor starters See ET 200pro Motor Starter
(http://support.automation.siemens.com/WW/view/en/22332388
)
operating instructions.
Controlling frequency converters See SIMATIC ET 200pro FC
(http://support.automation.siemens.com/WW/view/en/28561828
)
operating instructions.