Siemens ET 200pro - Page 346

Digital electronic modules
14.4 Digital electronic module 4 DO DC 24V/2.0A (6ES7142-4BD00-0AA0)
ET 200pro distributed I/O system
346 Operating Instructions, 03/2013, A5E00335544-08
Pin assignment of connection module CM IO 8 x M8
The table below shows the pin assignment of 4 DO DC 24V/2.0A on the connection module
CM IO 8 x M8.
View of circular connector
Terminal
Assignment X1 to X8
1
Not assigned
-
-
3
Ground for load voltage supply 2M
4 Output signal DQ
0
: Connector X1
Output signal DQ
1
: Connector X2
Output signal DQ
2
: Connector X3
Output signal DQ
3
: Connector X4
S (shield)
Functional earth (FE)
Connectors X5 to X8 are not assigned
Pin assignment of connection module CM IO 2 x M12
The table below shows the pin assignment of 4 DO DC 24V/2.0A on connection module
CM IO 2 x M12.
View of circular connector
Terminal
Assignment X1 and X2
1
Output signal DQ
0
: Connector X1
2
Output signal DQ
1
: Connector X1
3
Output signal DQ
2
: Connector X1
4
Output signal DQ
3
: Connector X1
5
Not assigned
6
Not assigned
7 Ground for load voltage supply 2M
8
Functional earth (FE)
Connector X2 is not assigned