Siemens ET 200pro - Page 454

Pneumatic interface modules
16.1 Pneumatic interface module 16 DO DC 24V CPV10 (6ES7148-4EA00-0AA0)
ET 200pro distributed I/O system
454 Operating Instructions, 03/2013, A5E00335544-08
Technical specifications
Data for selection of valve terminal
1
Medium Compressed air: Filtered (40 µm); oiled
(oil: VG 32); not oiled/vacuum
Pressure range
3 bar to 8 bar
Nominal flow rate
400 l/min
Valve switchover times
• On, by
17 ms
• Off
25 ms
Current consumption per valve
20 mA
1
For detailed information on valve terminals, refer to the FESTO documentation on the valve
terminals.