Siemens ET 200pro - Page 457

Pneumatic interface modules
16.2 Pneumatic interface module 16 DO DC 24V CPV14 (6ES7148-4EB00-0AA0)
ET 200pro distributed I/O system
Operating Instructions, 03/2013, A5E00335544-08
457
Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm) 120 × 152 × 47; with bus module, without FESTO
valve terminal CPV14
Weight
Approx. 560 g
Digital outputs
Number of outputs
16
Support of isochronous mode
No
Voltages and currents
Rated load voltage 2L+
24 V DC
• Reverse polarity protection
Yes, per module
Current consumption
• From backplane bus
Max. 25 mA
• From load voltage 2L+
Max. 370 mA, all valves on
Power loss of the module
Typ. 3.7 W
Electrical isolation
• Between channels and backplane bus
Yes
• Between backplane bus and all other circuit
elements
Yes
• Between channels and electronics power
supply
Yes
• Between channels
No
Permitted potential difference
• Between different electric circuits
75 V DC, 60 V AC
Isolation
Isolation tested
500 V DC
Status, interrupts, diagnostics
Status display
Green LED, per channel
Interrupts
• Diagnostic interrupt
Configurable
Diagnostic functions
• Group error display
Red LED (SF)
• Diagnostic information can be read
Yes