Starting the Programming Mod
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
6-17
For internal distribution only Operation
8. During installation of the HiPath 1000 (CAPI Interface) configure these two set-
tings:
9. A message will appear indicating that the best driver for the hardware has been
found.
Click "Next" to proceed.
● In the next window select "EUROISDN (DSS1)" and click "Next":
● Enter an available extension number in the "Phone # (MSN)" field. Confirm by
clicking “Next.“ The same window appears again. Click "Next" one more time
without entering anything in any field:
10. The installation of the USB drivers is now completed. CAPI applications installa-
tion will now start automatically (see “Installing CAPI Applications” on page 6-23).
Figure 6-11 Windows ME - selection for ISDN
Figure 6-12 Windows SE - MSN Number
To Next Page
Loading...
