Table of the System’s Programming Code
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
7-19
For internal distribution only Configuring the System Specifically for the Client
External Number
Registration
91 Slot: 001 to 140 DID final digits (up to 20
digits)
# instead of
slot
None
Assigning an exter-
nal number to an
extension
92 Slot: 001 to 140
+
1 - Day, incoming
2 - Night, incoming
3 - Day, incoming with delay
4 - Night, incoming with delay
Extension or Subscriber
Group (up to 10 extensions/
groups)
∗ - To delete
# instead of
extension
None
Busy Signal
**
004 Slot: 001 to 140
+
1 - Day
2 - Night
Busy Signaling Group: 001
to 140
# instead of the
code
All MSNs -
001
Local area code
filter
011 Enter the local area code (up
to 10 digits)
# instead of the
code
None
Country code filter 012 See
Table 7-18 on page 7-19
Enter the country code (up
to 10 digits)
# instead of the
code
55 - Brazil
* For E1 external digital lines select PP connection.
** This feature is valid only for digital lines with an attendant number. It is not valid if more than one extension is configured for
the slot/DID number/MSN. If the Fax/DID module is installed and configured for digital lines, this feature will also be invalid.
For more details on how to install S
0
MOs see “Limitations to System Expansion” on page 2-5.
Table 7-18 CAC Code (012)
Country CAC
Country CAC
South Africa 27 Latvia 371
Argentina 54 Lithuania 370
Brazil 55 Malaysia 60
Canada 1 Mexico 52
Chile 56 Pakistan 92
China 86 Peru 51
China 2 86 Portugal 351
Spain 34 Russia 7
Philippines 63 Singapore 65
Greece 30 Thailand 66
IM Spanish - Turkey 90
IM French - Ukraine 380
IM English - Venezuela 58
India 91 Vietnam 84
Italy 39 - -
Table 7-17 Digital trunk settings
Programmed
Functions
Code Intermediate Data Data to be Programmed Completing
Data Entry
Default
To Next Page
Loading...
