Expansion Module (EB
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
3-23
For internal distribution only Modules
EB 012 and EB 010 Expansion Modules
Interfaces
Figure 3-10 shows the distribution of extensions and external lines associated with
the EB 012 module connectors. The distribution associated with the EB 010 module
is limited by its capacity.
Connector assignments for the EB 012 and EB 010 Modules
Figure 3-10 EB 012 Module Overview
Table 3-13 EB 012 and EB 010 Connector Assignments
Contact X1 Connector X2 Connector X3 Connector X4 Connector
1 Connection to
MB through
backplane con-
nector
a1 - extension 1 a5 - extension 5 a9 - extension 9
2 b1 - extension 1 b5 - extension 5 b9 - extension 9
3 a2 - extension 2 a6 - extension 6 a10 - extension 10
4 b2 - extension 2 b6 - extension 6 b10 - extension 10
5 a3 - extension 3 a7 - extension 7 a11 - extension 11
6 b3 - extension 3 b7 - extension 7 b11 - extension 11
7 a4 - extension 4 a8 - extension 8 a12 - extension 12
8 b4 - extension 4 b8 - extension 8 b12 - extension 12
Note 1: X4 connector uses contacts 5 through 8 on the EB 012 only.
To Next Page
Loading...
