4-35
Batch
flexible
, Manual
C79000-G7076-C650-02
By double-clicking on the first operand you can call up a window where you
can select the apparatus, with the corresponding measuring points being
displayed and available for selection. Once you have confirmed with OK, the
entry will ve added to the transition dialog.
The first operand of a transition condition must contain a global variable
(measuring point). The second condition can contain a floating point number,
a whole number, a $ variable or a measuring point.
Measuring point are presented for inputting. Values and $ variables are
entered manually.
Any transition conditions which are not filled out will be ignored in the logic
operation which means that an empty table will count as a true condition.
With the second operand, you should proceed as with the first, until all of the
conditions have been entered which must be true in order to ensure that the
next AF in the recipe sequence is activated.
A line which has already been filled out and input can be moved or copied to
another line position in the transition mask. This is done either with the
pop-up menu or by using the keyboard in accordance with ’drag and drop’
conventions.
You can input a description of the transition’s function via the index card
’Description’.
Inputting operands
Moving and
copying
Inputting a
description
Recipe creation
To Next Page
Loading...
Need help?
General
