Siemens SIMATIC PCS7 - Operations in the Batch Status List

5-9
Batch flexible , Manual
C79000-G7076-C650-02
You can select one or more batches and then carry out the following actions
with the selected batches:
Table 5-1 Operations in the batch status list
Operation Action Requirement(s)
Set
block
The batches are given the status ’blocked’ Batch status = ’released’
Cancel
release
The batches are given the status ’released’ Batch status = ’blocked’
Delete
entry
Batches are no longer displayed in the batch
status list. They are retained in the database.
Batch status = ’finished’, ’aborted’,
’canceled’ or ’completed’
Automatic
starting
mode
The starting mode of the batch can be switched
from ’Manual’ to ’Automatic’.
Batch status = ’released’ or
’blocked’, starting mode ’Manual’
Manual
starting
mode
The starting mode of the batch can be switched
from ’Automatic’ to ’Manual’.
Batch status = ’released’ or
’blocked’, starting mode ’Automatic’
Open A batch can be opened by double-clicking on
it. In other words, in the batch window the
control recipe of the batch is displayed in the
same way as with the recept editor
(corresponding to the preferences specified in
the ’Tools’ menu).
None
Set
chaining
The batches are chained as described in
Chapter 6.3.3.
Batch status = ’released’ or
’blocked’,
the batch is not yet chained
Cancel
chaining
Chaining of the batch is canceled. Batch status = ’released’ or
’blocked’,
the batch is chained
Object
properties
Display of the batch mask. None
Start Execution of the batch is started – in other
words, the control recipe is executed. If the
required apparatuses are not free at the starting
time, the batch will take on the status
’waiting’. Once the equipment has been
released, recipe execution is continued
automatically.
Batch status = ’released’
Operations in the
batch status list
Batch control