2-3
Batch
flexible
, Manual
C79000-G7076-C650-02
The following software requirements must be satisfied:
Table
2-2
Software requirements
System Type or version
PC operating system Windows95 or WindowsNT 4.0
OS system WinCC V 3.0 and later
TCP/IP configured see Windows system settings
!
Caution
Please be aware that if there is no TCP/IP configuration or it is incorrect, the
setup program and the BATCH flexible programs will not run properly on a
multi-user system.
Software
requirements
Form Supplied / Installing / Starting
To Next Page
Loading...
