Siemens SIMATIC PCS7 - Form supplied; Requirements

2-2
Batch flexible , Manual
C79000-G7076-C650-02
2.1 Form supplied / Requirements
The BATCH flexible software is supplied on a CD. In addition there is also a
key diskette for unlocking licenses for the software.
The following hardware requirements must be satisfied:
Table 2-1 Hardware requirements
Components Properties
PC Pentium processor 90 MHz or faster,
256 KB cache
Memory 32 MB or better
Hard disk Free space required: at least 500 MB on
server or single-user system; at least 200
MB on client;
for setup procedure, at least 1 MB
available on the drive where the TEMP
directory is located (setup files will be
deleted once installation is completed).
Floppy drive 3.5 ”
Mouse Supported by MS Windows95/NT 4.0
Keyboard Supported by MS Windows95/NT 4.0
Printer Supported by MS Windows95/NT 4.0
CD-ROM Supported by MS Windows95/NT 4.0
Graphics 2 MB, 1024x768 resolution,
256 colors *
Monitor 17” or larger *
Network Ethernet with multi-user systems
* In the case of local terminals (OPxx) a resolution of 640 x 480 and a 14”
monitor will be adequate.
Scope of supply
Hardware
requirements
Form Supplied / Installing / Starting