1-17
Batch
flexible
, Manual
C79000-G7076-C650-02
1.5.7 Batch data preparation
The background application ‘Batch data preparation‘ does not have a user
interface. The following functions are carried out with the aid of batch data
preparation:
S Preparation of the measured values and messages of a batch which
occured and were collected by the OS during on-line execution as well as
saving to the corresponding BATCH flexibledatabase tables.
Batch data preparation is activated by batch control specifically for the
batches in progress. It terminates itself automatically once all batches have
been executed.
Batch data preparation requires the Runtime System of WinCC OS. In other
words, WinCC must be installed on the same computer.
Functions
Note
System overview
To Next Page
Loading...
