iv
Batch
flexible
, Manual
C79000-G7076-C650-02
The BATCH flexible software is based on the international standards DIN EN
61131-3 (IEC 1131-3) for programming languages and on ISA-SP88.01.
Note: The ISA-SP88 standard contains many ’can’ formulations.
Accordingly, the procedure part of the master recipe may,
for example, contain unit recipe procedures, recipe
operations and recipe functions. BATCH flexible
implements set these ’can’ formulations in a manner
appropriate to practical requirements; for example, a
BATCH flexible recipe only contains one further
hierarchical level, which is designated an automation
function (AF). The AF can however take the form of a
unit recipe procedure, recipe operation or recipe function
(see Chapter 4, Recipe creation).
This manual constitutes the documentation for BATCH flexible. As support
for your project planning, configuring and programming of an S7 automation
system, comprehensive user documentation is available which is intended to
be used selectively. The following explanatory material, together with the
following diagram, is provided to make the user documentation easier to use.
Standard
Location in the
information
landscape
Preface
To Next Page
Loading...
Need help?
General
