Sample Project for the Path Interpolation
4.8 Programming the path interpolation in MCC
TO Path Interpolation
110 Function Manual, 11/2010
4.8.3.2 Creating a WHILE loop
For the example, a While loop is created that is performed while start_move is set to true.
Figure 4-20 WHILE loop
4.8.3.3 Programming the A - B linear path
Before starting the forwards motion, the forw_back direction flag is set to true. This is
performed using a variable assignment.
To do this, place an ST zoom-in command within the While loop and program it as follows:
To Next Page
Loading...
