Siemens SIMOTION Function Manual

Sample Project for the Path Interpolation
4.3 Create axes.
TO Path Interpolation
Function Manual, 11/2010
99
1. Path interpolation technology selected
Figure 4-3 Creating an axis
2. Linear, virtual, non-modular axis
The configuration of the two axes is as follows:
Figure 4-4 Sample summary of the configuration (Axis_X axis)

Siemens SIMOTION Specifications

General

Power Supply	24 V DC
Interfaces	PROFIBUS, PROFINET, Ethernet
Product type	Control Unit
Series	SIMOTION D
Display Output	VGA