Siemens SINAMICS G120C DP

Further information
You will 󹪝nd additional information on the following PID controller components on the Internet
at:
• Setpoint input: Analog value or 󹪝xed setpoint
• Setpoint channel: Scaling, ramp-function generator and 󹪝lter
• Actual value channel: Filter, limiting and signal processing
• PID controller: Principle of operation of the D component, inhibiting the I component and the
control sense
• Enable, limiting the controller output and fault response
FAQ (http://support.automation.siemens.com/WW/view/en/92556266)
Advanced commissioning
8.19PID technology controller
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 295