Siemens TM SIWAREX WP351 HF User Manual

9. Place the unlock protection on the BaseUnit in such a way that the top end of the unlock
protection is placed in the housing of the electronic weighing system.



① Top end for inserting in the electronic weighing system
② Recesses for the fastening screws
③ Cable routing
Figure 7-1 Secure the unlock protection
10.Secure the unlock protection with three fastening screws.
The electronic weighing system can no longer be removed from the BaseUnit.
The connecting cables of the electronic weighing system, load cells or terminal boxes can
no longer be removed.
7.2 Checking parameters relevant to the calibration
Introduction
Verification of the scale according to Modul F of the corresponding directive by the conformity
assessment table involves the following procedure.
Operation requiring official calibration
7.2 Checking parameters relevant to the calibration
Technology module TM SIWAREX WP351 HF
Operating Instructions, 01/2020, A5E47521010-AA 125

Siemens TM SIWAREX WP351 HF Specifications

General

Brand	Siemens
Model	TM SIWAREX WP351 HF
Category	Control Unit
Language	English